Accu-Chek 98/79/EC Manual de servicio descargar pdf (Pagina 62)

122

Acoustic Mode

123

Acoustic Mode

6.1 Beep tones at power-on

When Acoustic Mode is set to on, you hear a long beep ( — ) when you

turn on the meter.

This is irrespective of which button you use to turn the meter on:

" the Test button in order to perform a test (see Chapter 4.3.1)

" the S button in order to change settings (see Chapter 3)

" the M button in order to retrieve results from memory (see Chap-

ter 5)

" the M and S button in order to send results (see Chapter 5.4)

If you press the Test button or M button to turn the meter on, you first

hear the long power-on beep followed by 6 further beeps spaced as

1 – 2 – 3 ( – – – – – – ).

6.2 Beep tones during testing

Following the power-on beep and the 1 – 2 – 3 sequence of beeps, you

will hear the following while you test:

" a single beep when the meter is ready to test so you can let the test

strip draw up blood or control solution,

" a single beep when the test strip has drawn up sufficient blood or

control solution and the test is starting,

" several beeps each time the meter displays an error message (see

Chapter 6.5).

6.3 Announcement of the result following a test

In Acoustic Mode, whenever your meter displays a result following a

blood glucose test, it also announces the result as a series of beeps. The

result is not treated as an entity, but is broken down into individual dig-

its.

Examples:

" The result 7.6 mmol/L is announced as 0 – 7 – decimal point – 6.

" The result 138 mg/dL is announced as 1 – 3 – 8.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 106 107

Sin comentarios

Accu-Chek 98/79/EC Manual de servicio Pagina 62