Accu-Chek NANO Manual de usuario descargar pdf (Pagina 59)

Troubleshooting Checks

5. Check if the strips and control

solutions were stored in a cool, dry

place.

Check if you followed the testing steps.

7. Check if you chose the correct control

solution level, either 1 or 2, when you

performed the test.

Check if the code number on the meter

display matches the code number on

the strip container.

9. If you are still unsure of the problem…

Action

Repeat the control test with a properly

stored strip or control solution.

Read Chapter 4, “Control Testing” and test

again. If you still have problems, call

Accu-Chek Customer Care at

1-800-363-7949.

If you chose the wrong control solution

level, you can still compare the control

result to the range printed on the strip

container.

If they do not match, insert the correct

code chip into the meter and test again.

Repeat the control test with a new

strip. If you still have problems, call

Accu-Chek Customer Care at

1-800-363-7949.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 84 85

Sin comentarios

Accu-Chek NANO Manual de usuario Pagina 59